Product Details:
|
Rapid: | 5min | High Recovery: | 80 - 105% |
---|---|---|---|
Shelf Life: | 1 Years | Detection Time: | 5min |
Storage Temperature: | 2-8°C | Specification: | 40T |
High Sensitivity: | 1ppb | ||
Highlight: | 5min Food Test Strip,Aflatoxin B1 Food Test Strip,Grain Test Strip |
CH60029
Aflatoxin B1 Strip Test Kit In Grain,Feed,Grain And Oil
Product Description
Aflatoxin B1 Strip Test is a qualitative and rapid lateral flow assay designed to detect Aflatoxin B1 residues in feed ,Oil sample. This test is designed for field use or reference lab settings. The unique features of the kit are:
l Rapid strip test method – 5 minutes
l High sensitivity (1ppb)
l High reproducibility
Procedure Overview
The assay uses a competitive colloidal gold based format. The sample is added to the test well to allow the Aflatoxin B1 binding protein on the gold particles to engage with any Aflatoxin B1 antibiotic present in the sample. Any gold particles that are not complexed with antibiotics present in the sample will bind to the Aflatoxin B1 antibiotic imprinted at the Test line (T-line), forming a signal (red line) at that position. If the Aflatoxin B1 binding protein on the gold particle has engaged with antibiotic present in the sample sample, the gold particle will flow past the T-line and reach the Control line (C-line).
Kit Contents, Storage and Shelf Life
The Aflatoxin B1 Strip test has the capacity for 50 determinations. The shelf life is 12 months when the kit is properly stored.
Kit Contents | Amount | Storage |
Reaction strip | 50strips | 4°C |
Manual | 1 | RT |
Preparation of Sample Extraction Buffer
70%methanol:The volume of methanol : distilled water is7:3
Sample preparation
Feed
1. Grind and mix a representative sample(according to accepted sample techniques)
2. Weight out 2 g of the ground sample and place into a suitable container.
3. According to the requirements of the different detection limit again according to the following table in Sample Extraction Buffer .
Sample Extraction Buffer | 4mL | 8mL | 16mL | 40mL |
Detection limit | 5ppb | 10ppb | 20ppb | 50ppb |
4. Centrifuger the sample for 5 minutes at 4000 rpm
5. .Take 100uL of the supernatant to a new tube and add 150uL of distilled water, shake for 1 minutes with a vortex.
Contact Person: Tina
Tel: +8615818799493